Gluck GmbH Corporation
Coordinating moldings are available for all styles and colors of Bruder Laminate flooring - in 8' lengths
Ensure the proper transition when your laminate flooring meets other floor coverings, such as vinyl, thin ceramic tile, or low-pile carpeting. The Overlap Reducer should be used for floors that have been installed using the floating installation method.
Quarter Rounds is used to finish the perimeter of the room where the expansion space was left for the seasonal expansion and contraction of the flooring, remove spacers and install Wallbase and/or Quarter Round.
Provides a smooth transition from Laminate Flooring to carpeting or tile as well as exterior doorways and hearths.
Overlap Stair Nose is used to provide a secure transition from the flooring surface while allowing the floating floor system to expand and contract freely at the step-down location. Overlap Stair Nose – (Floating Method) - provides the proper transition for stairways or steps. The Stair Nose also provides the proper overhang for a transition from one floor level to the next such as the step into a sunken living room.
Commonly used in doorways to join two laminate floors in adjoining rooms. It's also recommended when making transitions from a laminate floor to another floor that is approximately the same height T-Molding is used when two level flooring surfaces meet, like in a doorway or a narrow archway. In a doorway, center the T-Molding under the space that the closed door occupies. Likewise, in an archway, the T-Molding should be centered.
© 2013 All rights reserved